Fingerprint Time Attendance with Access Control System machine series is to adopt the most advanced fingerprint recognition algorithm, In the environment of climate change, peeling finger, or finger injury, in the case of full fingerprint recognition capabilities significantly improve and achieved full fingerprint Verification speed less than 1.0 seconds

The standard method of communication :USB,TCP/IP, Wifi. U-disk download/upload function, the built-in ID, (optional) IC, RF card reader. Realization of radio frequency card, fingerprint, password or select any combination to open the door ways or can choose the way of fingerprint security strengthen + fingerprint to open the door .The appearance is ingenious and elegant, it ‘s easy to operate with powerful functions.

 

1) How to Power On Device?

Ans:-> 

          Connect the adaptor to device and Turn on Black Toggle Switch of Device. 

2) How Register New User with Fingerprint?

Ans:-> 

          Click Menu->User->User->Finger->Please Input ID No. ->Put the Finger 3 times.

3) How Register New User with Password?

Ans:->

         Click Menu->User->User->Password->Please Input ID No. ->Enter 6 digit password->Repeat the entered password.

4) How Register New User with ID Card?

Ans:-> 

          Click Menu->User->User->ID Card->Please Input ID No. ->Swipe the ID Card.

5) How register Admin User?

Ans:->

          Click Menu->User->Admin->Finger->Please Input ID No. ->Put the Finger 3 times.

6) How Register Admin User with Password?

Ans:->

          Click Menu->User->Admin->Password->Please Input ID No. ->Enter 6 digit password->Repeat the entered password.

7) How Register Admin User  with ID Card?

Ans:->

          Click Menu->User->Admin->ID Card->Please Input ID No. ->Swipe the ID Card.

8) How to Clear Admin Privileges?

Ans:-> 

          Click Menu->User->Admin->CLRManage->Ok.

9) How To add Backup Fingerprint?

Ans:-> 

          Click Menu->User->Backup-> Finger->Please Input ID No. ->Put the Finger 3 times.

10) How To add Backup Password?

 Ans:->

        Click Menu->User->Backup-->Please Input ID No. ->Enter 6 digit password->Repeat the

11) How To add Backup ID Card ?

Ans:->

        Click Menu->User->Backup- ID Card->Please Input ID No. ->Swipe the ID Card.

12) How to Delete User?

Ans:-> 

         Click Menu->User->Delete-> Please Input ID No. ->Ok

13) How to Check Device Number or Machine Number?

Ans:-> 

         Click Menu->com->Device No

14) How to change Communication mode?

Ans:->

         Click Menu->com->com->select desired communication mode-> Ok

15) How to Set IP address of Device?

Ans:->

          Click Menu->com->TCP/IP->1st Option Set IP Address->Enter free Static IP.

16) How to Set Subnet Mask of Device?

Ans:-> 

          Click Menu->com->TCP/IP->2nd Option Set Subnet Mask ->Enter 255.255.255.0

17) How to Set IP Gateway of Device?

Ans:-> 

           Click Menu->com->TCP/IP->3rd Option Set Gateway->Enter Gateway

18) How to Set Local Port of Device?

Ans:->

           Click Menu->com->TCP/IP->4th Option Set Local Port->Enter 5005.

19) How to Set IP address of Device?

Ans:->

          Click Menu->com->TCP/IP->5th Option Set Server->Enter IP address of Server 

20) How to Set Server Port of Device? 

Ans:-> 

           Click Menu->com->TCP/IP->6th Option Set Server Port->Enter 8000

21) How to check Number of Registered User? 

Ans:-> 

             Click Menu->Info-> Storage-> Ok

22) How to Set Date and Time in Device? 

Ans:->

         Click Menu->Settings-> Time Set-> Enter Date->Enter time in 24 hours Format

23) How to Reset Device Setting?

Ans:->

         Click Menu->Settings-> Advanced-> Restore Default Set->Ok

24) How to Check whether device Communicating or Not?

Ans:-> 

        Open Command prompt on PC where Software Installed and Enter the command Ping IP address of device if response comes then device connected otherwise device not connected.

25) How to Set Standby Time?

Ans:->

         Click Menu-> Settings-> Advanced->11th Option Standby Mode is Set-> Enter Standby Time in Minutes